DL485DMX has 4 dimmable outputs that can be controlled by the DMX512 BUS, and the unit can also work as a normal smart dimmer controlled by buttons with all the functions available.

The unit address can be set using the programming button on board, between 1 and 512, the first channel will have the unit address and the other three will have consecutive addresses.

The highest address that allows access to all channels is 509 because the fourth channel will be at 512, while setting the unit address to 511 for example, you will have access only to the first 2 channels at addresses 511 and 512.

To facilitate installation and problem solving, the presence of the DMX carrier is signaled by means of LEDs, as is the status of the outputs.

Using a button on the unit, it is possible to set the unit as a DMX dimmer or as a normal smart dimmer controlled by buttons, or with automatic switching from DMX to normal and vice versa depending on the presence of the DMX signal on the BUS.

Programming via button is facilitated by the signals of the two neighboring LEDs.


BUY PRODUCT

TECHNICAL INFORMATION